Search
Best Results
Weathercoat Medium Tex
Weathercoat Flex Tex Medium is a high-performance elastomeric water-based exterior coating formulated with pure acrylic emulsion and fine quartz chips. It delivers excellent exterior durability, resists fungal and bacterial attack, and bridges cracks for a seamless finish. Suitable for exterior walls requiring crack-bridging protection on properly prepared masonry surfaces.
Excellent Elastic Property
Anti Carbonation
Crack Bridging
UV Resistant
Resist Fungal & Bacterial Attack
Uses
Characteristics
Properties
Suitable for exterior, can be applied for interior use.
Applied on concrete and brick walls, plastered surfaces and masonry surfaces substrates.
Not suitable for immersed condition.
Outstanding exterior durability with elastomeric technology.
Excellent elastic recovery and resilience properties.
Superior anti-carbonation and crack-bridging capabilities.
Flexible across a broad temperature range.
Breathable formula prevents moisture accumulation.
Good resistance against dirt pick-up.
UV resistant for lasting colour retention.
Low toxicity and odour.
Environmentally friendly formulation.
| Properties | Value |
|---|---|
| Sheen Variants | Slight Sheen |
| Colours | Limited range, including white |
| Volume Solids | 48% ± 2% |
| Recommended DFT (Minimum) | 150 microns |
| Theoretical Spread Rate (Minimum) | 3.2 m2/Liter |
| Recommended DFT (Typical) | 200 microns |
| Theoretical Spread Rate (Typical) | 2.4 m2/Liter |
| Recommended DFT (Maximum) | 250 microns |
| Theoretical Spread Rate (Maximum) | 1.9 m2/Liter |
| Drying time @25°C | Touch dry 5 hours |
| Over coating interval (Maximum) | 16 hours |
| Drying time @35°C | Touch dry 3 hours |
| Over coating interval (Maximum) | 12 hours |
| Drying time @45°C | Touch dry 2 hours |
| Over coating interval (Maximum) | 8 hours |
| Thinner | Fresh Water |
| Thinning ratio (by vol.) | Maximum 3% |
